Connect to us (11AM - 7PM) : +91 9831946352

CENTRALISED MEDICAL GAS PIPELINE SYSTEM (CMGPS)

We are ISO 9001 : 2015 certified Company, complying with Medical Device Quality Management System (QMS) ISO 13485 : 2016 & our products matches to International Quality Standards (IQS) resulted to hold "CE" mark. We have been offering our  services according to the needs of Corporate Hospitals, Private Hospitals, Medical Colleges, State Government Hospitals & Railway Hospitals throughout the nation. 

It would not be odd to mention that our effective prices are most competitive & reasonable according to the customer needs.

PRODUCT GALLERY FOR CMGPS

WARD VACUUM UNIT 

MODEL NO. S/019

WARD VACUUM UNIT.PNG

FEATURES:

Suction unit will be of light weight & compact. The unit consists of:

  • Easy to operate unique design regulator with precise control

  • Transparent glass is used below regulator with cotton inside to visualize incase of overflow of fluid from suction jar.

  • 600ml / 1000ml / 2000ml reusable collection jar, made of unbreakble polycarbonate material & fully auto-clavable at 134°C (273.2°F).

  • A wall bracket for mounting the jar assembly on the wall. The vacuum regulator will be infinitely adjustable & have vacuum gauge which indicates suction supplied by the regulator. Safety trap will be provided inside the jar to safeguard the regulator from overflowing.

OXYGEN GAS OUTLET POINTS

MODEL NO. 02/005

OXYGEN GAS OUTLET POINTS.PNG

FEATURES:
Gas outlets with only one rubber sealing component. For positive pressure gas services, the outlet shall be equipped with a primary & secondary check valve shall be rated at minimum 200 psi. In the event the primary check valve is removed for maintenance. The outlet assembly should have separate colour coding for each service & will accept only corresponding gas specific adaptors. All outlets shall be cleaned & de-grease for medical gas service, factory assembled & tested. The medical gas outlets should be of quick connecting & wall mounted modular type. 

SINGLE ARM O.T. PENDANT

MODEL NO. P/030

SINGLE ARM OT PENDANT.PNG

This pendant has single arm with free rotation at 330° angle & has following features:

  • Convenient positioning of medical equipments

  • Medical gas terminal outlets

  • Electrical & specialty services

  • Ceiling mounted with robust flange supporting arrangements

  • Vertical leg & horizontal arm made fron good quality steel & powder coated to prevent any rust

  • There will be one support arm - 700mm long

  • Support arm will be robust & revolve on high quality bearings to ensure smooth & quick glide of pendant head. There is a provision of adjustment knob  to regulate free movement of head.

  • 680 x 280 mm service box made of high purity aluminium to accommodate two oxygen, two vacuum, one 7bar, one N2o & four bar air terminal outlets, 8 three pin 6/16 A electrical sockets (four will be connected to line power & four will be connected to UPS), data switch & socket for telephone.

  • One monitor tray 760 x 350 mm made from stainless steel

  • IV stands made from stainless steel

  • All medical hose pipes will be antistatic & both ends of hose pipes will be non interchangable

  • Electrical junction box mounted to carcass system over the false ceiling for connection of electrical cable services

  • Cable for inside pendant are nonflammable, low smoke & halogen free type. All cable will pass through flexible conduits gulator. Safety trap will be provided inside the jar to safeguard the regulator from overflowing.​​​

OXYGEN FLOWMETER WITH HUMIDIFIER

MODEL NO. F/007

OXYGEN FLOWMETER WITH HUMIDIFIER.PNG

Back pressure compensated flow meter will be of accurate gas flow measurement with following features:

  • Control within a range of 0 - 15 lpm (calibration within           +/- 10%). It will meet strict precision & durability standard.

  • The flow tube & shroud components will be made of clear, impact resistant polycarbonate.

  • Inlet filter of stainless steel wire mesh to prevent entry of foreign particles.

  • The humidifier bottle will be made of unbreakbale polycarbonate material & autoclavable at  134°C (273.2°F) temparature tested. The medical gas outlets should be of quick connecting and wall mounted modular type.

THEATRE SUCTION UNIT

MODEL NO. S/017

THEATRE SUCTION UNIT.PNG

FEATURES:
Theatre Suction unit consisting of two reusable 2000ml shatter resistant bottle, each made up of polycarbonate material & fully autoclavable at 134°C (273.2°F). A vacuum regulator with instant ON / OFF switch & a three way selector switch with an option to operate either - Left, Right or Both. All the above items will be mounted on an aluminium powder coated trolley to prevent any rust & free moving castor wheels.

ISOLATION VALVE BOX WITH ISOLATION VALVE

MODEL NO. V/024

ISOLATION VALVE BOX WITH ISOLATION VALVE.PNG

FEATURES:

  • Valve Box two gas, three gas, four gas, five gas

  • Pressure gauge for individual gas service

  • Safety lock for valve box

  • Transparent PVC front cover for valve box

  • Material construction for valve box : Midsteel with powder coated / stainless steel grade 304 

DIGITAL ALARM BOX

MODEL NO. DG/027

digital alarm box.PNG

Microprocessor based digital controlled alarm for 2 gas, 3 gas, 4 gas & 5 gas will have following features:

  • Display of line pressure for all the services with factory callibrated pressure sensors.

  • Color coded LED display of line pressure status (High - Caution - Normal - Caution - Low)

  • Audible alarm for high & low pressure condition

  • Test & alarm acknowledge (mute) facility

  • Small & compact design. Light weight

  • Mounted on a powder coated MS box

  • Nut & Nipples are provided for connection

  • Pneumatic supply line

  • Low voltage internal operation with input power supply of     220V AC

  • Easy wall mounting facility

DOUBLE ARM O.T. PENDANT

MODEL NO. P/032

DOUBLE ARM OT PENDANT.PNG

Double arm pendant is preferred to better flexibility of the equipment with respect to operation table & will have the followinng features:

  • Convenient positioning of medical equipments

  • Medical gas terminal outlets

  • Electrical & specialty services

  • Ceiling mounted with robust flange supporting arrangement

  • There will be two horizontal support arms - each 700 mm long. Free rotation of each arm is 330°

  • Support arms will be robust & revolve on high quality bearings to ensure smooth & quick glide of pendant head. There is a provision of adjustment knob to regulate free movement of head.

  • Vertical legs & horizontal arms are made from good quality steel & powder coated to prevent any rust.

  • 760 x 350 mm service box made of high purity aluminium to accomodate two oxygen, two vacuum, one air 7 bar, one N2o & two 4 bar air terminal outlets, ten three pin 6/16 A electrical sockets (six will be connected to line power & four will be connected to UPS), data switch & socket for telephone

  • One monitor tray 760 x 350 mm made from stainless steel.

  • Two infusion pump stands made from stainless steel to accommodate maximum ten infusion pumps at a time

  • Two IV stands made from stainless steel

  • All medical hose pipes will be antistatic & both ends of hose pipes will have non-interchangeable

  • Electrical junction box mounted to carcass system over the false ceiling for connection of electrical cable services

  • Cable for inside pendant are nonflammable, low smoke & halogen free type. All cable will pass through flexible conduits.

VERTICAL I.C.U. PENDANT

VERTICLE ARM OT PENDANT.PNG

MODEL NO. P/031

330° movable vertical pillar type ceiling mounted pendant has following specifiation:

  • ​Convenience positioning of medical equipments

  • Medical gas terminal outlets

  • Electrical & specialty services

  • Vertical ceiling mounted pillar / column made from schedule 40 carbon steel pipe & powder coated. Height of the pillar can be manufactured to suit the ceiling height

  • 620 x 280 mm service box made of high purity aluminium to accommodate two oxygen, two vacuum & two 4 bar air terminal outlets, eight 3 pin 6/16 A electrical sockets (four number will be connected to line power & remaining four will be connected to UPS), data switch & socket for telephone

  • One monitor tray 760 x 350 mm made from 316 grade stainless steel

  • IV stands made from 316 grade stainless steel

  • All medical hose pipes will be antistatic & both ends of hose pipes will be non interchangeable

  • Electrical junction box mounted to carcass system over the false ceiling for connection of electrical cable services

  • Cable for inside pendant are non-flammable, low smoke & halogen free type. All cable will pass through flexible conduits

OXYGEN MANIFOLD

MODEL NO. 02/001

OXYGEN MANIFOLD.PNG

FEATURES:

Oxygen manifold should be suitable to withstand a pressure of 145kg/cm2, along with high-pressure copper annealed tail pipes with end brass adapter suitable for oxygen cylinders & manifold. Top frame comprising of high pressure copper pipes of             size 1/2" I.D. x 15 swg with high pressure brass fittings made of high tensible brass & connections through non-return valves; high pressure copper tail pipes, made of high pressure copper pipe of size 1/4" I.D. x 15 swg. The design of middle & bottom frames should be provided to fit both round & flat bottom cylinders safely. The manifold shall be tested (hydraulically) at 3500 psig & necessary test certificates will be provided. Only Non Halogenated Polymer materials will be used in the Non Return Valves supplied along with the manifold.

BED HEAD PANEL

MODEL NO. B/034

BEAD HEAD PANEL.PNG

FEATURES:

  • Material of Construction : Aluminium

  • Finish : Epoxy powder coated

  • Colour : On demand, to suit aesthetic look of the room

  • Overall Dimensions : Variable as per client's requirement

  • Gas Terminal Outlet : as per client's requirement

  • Type of Gas Outlet : as per client's requirement

  • Electrical Output : Four numbers

  • Nurse call : One number (provision)

  • IV stand : one number

  • Infusion pump stand : one number

  • Compliance with Standard : HTM (UK) 2022.

ADVANTAGES:

  • Corrosion & moisture free due to rigid powder coated aluminium body & bottom rail

  • Designed to withstand fumigation process & there is no problem with any kind of bugs & termite

  • Does not release any toxic gases in the event of fire

  • Maintenance free due to well designed double lock gas outlets

  • Room light & reading light both are available from it

  • Cable for inside pendant are non-flammable, low smoke & halogen free type. All cable will pass through flexible conduits.

DIGITAL ALARM WITH VALVE BOX

OXYGEN MANIFOLD ROOM.PNG

Medical oxygen manifold is a system device that decompresses several oxygen cylinders after they are grouped together and then transports them through the main gas pipeline to the user terminal. Oxygen Automatic Manifold is mainly suitable for continuous consumption of bottled oxygen hospitals. 

FULLY AUTOMATIC CONTROL PANEL WITH ANALOG

MODEL NO. CP/001

control panel.PNG

Fully Automatic control panel - Oxygen Service
The Oxygen Control panel shall be CE Mark & microprocessor based Digital type / Display type. Pressure reduction shall be in two stages. The control panel shall be integrated with pressure gauges inside the panel. The panel shall be fitted by standby line regulator. After line regulator there should be a relief valve mechanism for testing & service purpose. Panel shall be fully automatic & shall switch over from Bank in use to Reserve Bank without fluctuation in delivery line pressure & without the need of externel electrical power. After switch over the Reserve Bank shall become the Bank in use & Bank in use shall become the Reserve Bank. The control panel wil be powered by a microprocessor. The unit shall be compact. A microprocessor circuit board assembly shall provide a relay output to give indication when or just before the manifold switches from one bank of cylinders to another.
The switch over shall be controlled electrically by solenoid valves only. To avoid excess pressure being supplied to the distribution system a pneumatically relief valve for the line regulator shall be incorporated. An intermediate pressure relief valve shall be installed between the high-pressure regulators & the line delivery regulators.
The control panel incorporates three coloured LED's & eleven  indicators with four for the Left Bank & four for the Right Bank & three for the main line.
Duty bank - orange colour for duty bank, Green for the Normal & Stand By condition and Red for Low condition. Same for Reserve Bank, for Main line - Orange colour for active of main line, Green for Normal & Red for Low condition. All pressure transducers & display LED's shall be pre-wired to an internal on microprocessor circuit board. The Control Panel should should be made to provide Heavy duty with a Flow Capacity of over 1500 lpm Panel shall be Compatible for interfacing with the information Management System (optional). Optional Interface to PC running Window. Test & Mute facility should be there. Timer of Mute shall be 10 min & will active after mentioned time period.
The Dimension of indication shall be 12 x 12 mm specially for readable in poor lighting.
The control panel should be 666 x 608 x 205 in size.

Note: CE Mark shall be embossed in cabinet only with Manufacturer brand name.

 

  • Fully automatic control panel will be operated by solenoid valves only (Parker make) size - 1/2"(F) thread with 24 volts coil

  • Pressure gauges 0 - 280kg/cm2, 63mm dial, back connection, 1/4" BSP thread - 2 nos. for the high pressure line (make Wika)

  • Pressure gauges 0 - 10 kh/cm2, 63mm dial, back connection, 1/4" BSP thread - 1 nos for the main line (make Wika)

  • Pressure gauge 0 - 16 kg/cm2, 50mm dial, bottom entry, 1/4" BSP thread - 4 nos, for the outlet of IOX - 14 regulators &            Janatics regulators.

  • Janatics regulators should be 1/2" BSP thread - 3 nos.

  • At the time of By pass, system will be like this the there is no need for disturbing any setting of regulator.

  • Isolation valves - 5 nos.

  • Pressure switches will be CE marked

  • Which bank is in Running position that will be indicated by separate indicator

  • Normal & Low indicators with Test & Mute switches will be operated.

  • The flow of gas will not stop at the time of failure of power.

  • Control voltage will be supplied separately for the safety of the solenoid valves coil.

  • Test switch will be operated by timer only. (It should not work up to pressing the switch).

  • Fully automatic control panel will be worked  only at 12 volts & 24  volts DC.

SEMI AUTOMATIC CONTROL PANEL

MODEL NO. CP/002

SEMI AUTOMATIC CONTROL PANEL MR ENGG WORKS.PNG